Lost internet connection after configuring working IPTV |
您所在的位置:网站首页 › Openwrt iptv eth01 › Lost internet connection after configuring working IPTV |
Hi eveyone, I connect to ISP by Ethenet cable on Wan port of openwrt router (Netgear WAX202 with 1 WAN and 3 LAN ports). Default configuration works well with PPPOE Wan connection to internet. And the default configuration is as follows: default-interfaces1137脳902 87.9 KB default-devices1072脳906 107 KB/etc/config/network is config interface 'loopback' option device 'lo' option proto 'static' option ipaddr '127.0.0.1' option netmask '255.0.0.0' config globals 'globals' option packet_steering '1' option ula_prefix 'fd2d:e572:5689::/48' config device option name 'br-lan' option type 'bridge' list ports 'lan1' list ports 'lan2' list ports 'lan3' config device option name 'lan1' option macaddr '34:98:b5:12:f1:5c' config device option name 'lan2' option macaddr '34:98:b5:12:f1:5c' config device option name 'lan3' option macaddr '34:98:b5:12:f1:5c' config interface 'lan' option device 'br-lan' option proto 'static' option ipaddr '192.168.1.1' option netmask '255.255.255.0' option ip6assign '60' config device option name 'wan' option macaddr '34:98:b5:12:f1:5d' config interface 'wan' option device 'wan' option proto 'pppoe' option username 'xxxxxxx' option password 'xxxxxxx' option ipv6 'auto' config interface 'wan6' option device 'wan' option proto 'dhcpv6'I tried to configure IPTV on the router, my ISP only requires a special VLAN ID 103 on port that STB is connected. No igmproxy or other requirements. I decided to connect STB (ISP provided IPTV box) on port 3 so I excluded port 3 on default br-lan bridge device. default br-lan1024脳477 36.1 KB lan3-discarded1014脳466 32.2 KBThen created a new bridge device called br-iptv with lan3 and wan port , addeed VLAN with ID 103. lan3-discarded1014脳466 32.2 KB define VLAN1031009脳460 32.7 KBFinnaly created an interface for IPTV called WANIPTV using br-iptv WANIPTV interface created1012脳484 33.9 KBFinal devices and interfaces are as follows final devices1086脳901 125 KB final interfaces1076脳790 103 KBand the /etc/config/network is config interface 'loopback' option device 'lo' option proto 'static' option ipaddr '127.0.0.1' option netmask '255.0.0.0' config globals 'globals' option packet_steering '1' option ula_prefix 'fd2d:e572:5689::/48' config device option name 'br-lan' option type 'bridge' list ports 'lan1' list ports 'lan2' config device option name 'lan1' option macaddr '34:98:b5:12:f1:5c' config device option name 'lan2' option macaddr '34:98:b5:12:f1:5c' config device option name 'lan3' option macaddr '34:98:b5:12:f1:5c' config interface 'lan' option device 'br-lan' option proto 'static' option ipaddr '192.168.1.1' option netmask '255.255.255.0' option ip6assign '60' config device option name 'wan' option macaddr '34:98:b5:12:f1:5d' config interface 'wan' option device 'wan' option proto 'pppoe' option username 'xxxxxxxx' option password 'xxxxxxxx' option ipv6 'auto' config interface 'wan6' option device 'wan' option proto 'dhcpv6' config device option type 'bridge' option name 'br-iptv' list ports 'lan3' list ports 'wan' config bridge-vlan option device 'br-iptv' option vlan '103' list ports 'lan3:u*' list ports 'wan:t' config interface 'wanIPTV' option proto 'dhcp' option device 'br-iptv'With this configuration IPTV works perfect but , WAN connection drops on lan1 and lan2. What may be the problem? Thanks for the help in advance. |
CopyRight 2018-2019 办公设备维修网 版权所有 豫ICP备15022753号-3 |